DYJ-1000S电脑全自动井盖压力试验机

一、产品简介：

DYJ-1000S 型电脑全自动井盖压力试验机是采用了液压动力源驱动，电液伺服控制技术，计算机数据采 集处理，可实现闭环控制及自动检测的高精度材料试验设备，其由试验主机、油源（液压动力源）、测控系统、 试验器具四部分组成，大试验力 1000kN，试验机准确度等级优于 1 级。 DYJ-1000S 型电脑全自动井盖压力试验机用于各种材质井盖承载能力（残留变形及试验载荷）试验，可 以实现等速率加荷、等速率变形等闭环控制，可以实现试件技术指标的自动求取。 

1. Product introduction

DYJ-1000S computer fully automatic manhole cover pressure testing machine is a high-precision material testing equipment that adopts hydraulic power source drive, electro-hydraulic servo control technology, computer data acquisition and processing, and can realize closed-loop control and automatic detection. It is composed of four parts: power source (hydraulic power source), measurement and control system, and test equipment, with a large test force of 1000kN, and the accuracy of the test machine is better than level 1. The DYJ-1000S computer fully automatic manhole cover pressure testing machine is used to test the bearing capacity (residual deformation and test load) of various material manhole covers. It can realize closed-loop control such as constant rate loading and constant rate deformation, and can realize the automatic technical indicators of the test piece. Ask for.

配置

软件：荣计达版本 2.1 

传感器：Novotechnik 

油泵:威乐 

该试验机及配件符合以下标准要求： 

GB/T23858-2009《检查井盖》 

GB/T26537-2011《钢纤维混凝土检查井盖》 

CJ/T211-2005《聚合物基复合材料检查井盖》 

CJ/T121—2000《再生树脂复合材料检查井盖》 

CJ/T3012《铸铁检查井盖》 

CJ/T511-2017《铸铁检查井盖》 

GB/T2611《试验机通用技术要求》 

GB/T16826 《电液伺服试验机》 

Configuration

Software: Rongjida version 2.1

Sensor: Novotechnik

Oil pump: Wilo

The testing machine and accessories meet the following standard requirements:

GB/T23858-2009 "Inspection Manhole Cover"

GB/T26537-2011 "Steel Fiber Concrete Inspection Manhole Cover"

CJ/T211-2005 "Polymer Matrix Composite Material Inspection Manhole Cover"

CJ/T121—2000 "Recycled resin composite material inspection manhole cover"

CJ/T3012 "Cast Iron Inspection Manhole Cover"

CJ/T511-2017 "Cast Iron Inspection Manhole Cover"

GB/T2611 "General Technical Requirements for Testing Machines"

GB/T16826 "Electro-hydraulic Servo Universal Testing Machine"

二、产品参数 ：

◆大试验力： 1000KN； 

◆准确度等级： 1 级； 

◆示值相对误差： ±1%； 

◆有效测量范围： 1%-%F·S（全量程不分档）； 

◆变形示值相对误差：±1%； 

◆变形测量分辨力： 0.001mm； 

◆压缩面大间距： 300 mm； 

◆两立柱间有效距离：1200mm； 

◆活塞行程： 300 mm； 

◆活塞移动大速度：80 mm/min； 

◆上压板尺寸： Φ250 mm； 

◆下压板尺寸： Φ356 mm； 

◆主机外形尺寸： 1450 mm×1250 mm×1800 mm； 

◆油源柜尺寸： 800 mm×600 mm×1600 mm； 

◆整机功率： 1.8kW（油泵电机 1.5kW）； 

◆油源柜重量： 300 kg； 

◆主机重量： 约 3000 kg；

2. Product parameters:

◆Large test force: 1000KN;

◆Accuracy level: Level 1;

◆Relative error of indication: ±1%;

◆Effective measuring range: 1%-100%F·S (full range without bins);

◆Relative error of deformation indication: ±1%;

◆Resolution of deformation measurement: 0.001mm;

◆Large spacing between compression surfaces: 300 mm;

◆Effective distance between two columns: 1200mm;

◆Piston stroke: 300 mm;

◆Piston moving speed: 80 mm/min;

◆Upper plate size: Φ250 mm;

◆Size of lower plate: Φ356 mm;

◆The external dimensions of the host: 1450 mm×1250 mm×1800 mm;

◆Oil source cabinet size: 800 mm×600 mm×1600 mm;

◆The power of the whole machine: 1.8kW (oil pump motor 1.5kW);

◆Oil source tank weight: 300 kg;

◆Main engine weight: about 3000 kg;