上海荣计达仪器科技有限公司

咨询电话:137-6111-8616


手动脱模器

手动脱模器配合“多功能电动击实仪”马歇尔电动击实仪”及其他手动击实仪的试件脱模用。它适用于直径为φ100mm、152mm ,高度为170mm以内的试模筒,使用方便,操作简单。

  • 型号: TM-125

  • 产品参数
  • 型号: TM-125

上海荣计达仪器科技有限公司**经营水泥实验仪器、混凝土实验仪器、公路土工实验仪器、干粉砂浆保温砂浆实验仪器、沥青防水材料实验仪器、油漆涂料实验仪器、无损检测等实验仪器。**经营水泥实验仪器、混凝土实验仪器、公路土工实验仪器、干粉砂浆保温砂浆实验仪器、沥青防水材料实验仪器、油漆涂料实验仪器、无损检测等实验仪器。公司产品凭借过硬的质量、完善的售后服务、合理的价格畅销各大院校、检测单位、建材企业、工程建设单位。在消费者当中享有较高的地位和良好的口碑,用户遍布国内近三十个省市、自治区,并远销国外,与用户建立了长期稳定的合作关系。公司实力雄厚,重信用、守合同。有健全的管理制度和完善健全的质量管理体系。并有反应迅速、服务周到的售后服务系统。我们将不懈努力、一如既往以优异的品质为客户服务。

Shanghai Rongjida Instrument Technology Co., Ltd. ** operates cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, nondestructive testing and other experimental equipment. ** Operating cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. Company products rely on excellent quality, perfect after-sales service, reasonable prices sell well in major universities, testing units, building materials enterprises, engineering construction units. It enjoys a high status and a good reputation among consumers, and has customers in nearly 30 provinces, cities, and autonomous regions in China, and has been exported to foreign countries. It has established long-term and stable cooperative relationships with users. The strength of the company, credit and contract compliance. Have a sound management system and a sound quality management system. And has a responsive and thoughtful after-sales service system. We will make unremitting efforts to serve our customers with excellent quality as always.


手动脱模器配合“多功能电动击实仪”马歇尔电动击实仪”及其他手动击实仪的试件脱模用。它适用于直径为φ100mm、152mm ,高度为170mm以内的试模筒,使用方便,操作简单。

The manual demoulder is used to demould the test piece of the "multifunctional electric compactor" Marshall electric compactor "and other manual compactors. It is suitable for the test cylinder with a diameter of φ100mm, 152mm and a height of 170mm. Easy to use and simple to operate.


手动脱模器主要技术参数:

★A大脱模力:125KN

★活塞A高上升**限距离:175mm

★重量:55kg

★外形尺寸(宽×深×高)360×310×660mm

Main technical parameters of manual ejector:

★ A large release force: 125KN

★ High rise of piston A ** Limit distance: 175mm

★ Weight: 55kg

★ Dimensions (W × D × H) 360 × 310 × 660mm


手动脱模器使用与保养:

★根据脱模试筒的大小,选用脱摸板,φ152mm脱摸板.即为脱摸器上顶板,使用时将脱摸器板拆下即可。

★将试模筒连同试模盖套在活塞顶端,试模筒中对正脱模器顶板的圆孔中,将千斤顶下端旋钮旋紧,一手按住脱模起上端,防止脱模器倾倒,另一手掀动千斤顶手柄将活塞升器,开始拖模。

★脱模完成后,旋松千斤顶下端选钮,用力将活塞压下,并取出试模。

★经常保持仪器的清洁,每次使用完毕后应擦拭仪器,如长期不用时应加塑料罩

Use and maintenance of manual ejector:

★ According to the size of the demoulding cylinder, a demolding plate, φ152mm demolding plate is selected. It is the top plate of the demolding device, and the demolding plate can be removed when using.

★ Put the test tube with the test cover on the top of the piston. Align the bottom hole of the ejector in the circular hole of the top plate of the test tube. Hold the upper end of the ejector with one hand to prevent the ejector from falling. Tilt the jack handle with one hand to lift the piston lifter and start dragging.

★ After the demoulding is completed, unscrew the selector button on the lower end of the jack, press down the piston with force, and take out the test mold.

★ Always keep the instrument clean, wipe the instrument after each use, and add a plastic cover if not used for a long time


手动脱模器
手动脱模器配合“多功能电动击实仪”马歇尔电动击实仪”及其他手动击实仪的试件脱模用。它适用于直径为φ100mm、152mm ,高度为170mm以内的试模筒,使用方便,操作简单。
长按识别二维码查看详情
长按图片保存/分享

手动脱模器

询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

扫一扫关注我们

Copyright @ 2018 上海荣计达仪器科技有限公司.All Rights Reserved   沪ICP备11009963号-4     

Copyright @ VillaGrandis All Rights Reserved某某某有限公司版权所有        

ICP备案号180006020号-3

 

客服中心
热线电话
13761118616
上班时间
周一到周日
二维码