FZ-10涂层附着力拉拔仪

一、产品简介：

新研制开发的一种新型仪器，该仪器是附着力的测量方式带来了全新的变革。采用高精度拉力传感器，液晶显示数据直读。携带方便，使用方便，方便用于现场测量。可测量金属、混凝土及其他材质涂层的附着力。

irst, product introduction;

A new type of instrument recently developed, which is a new revolution in the way adhesion is measured. The high-precision tension sensor is used to directly read the liquid crystal display data. Easy to carry, easy to use, convenient for on-site measurement. It is a professional testing instrument. It can measure the adhesion of metal, concrete and other material coatings. It is an indispensable testing instrument for each quality inspection and construction unit.

二、技术参数：

♦力值：0～10.000KN   强度值：50mm试块 0～5.09MPa

♦强度值：20mm试块 0～31.84MPa

♦分辨率 0.001KN / 0-001MPa 

♦液压油缸行程 10mm 

♦主体材质 轻质合金 

♦主体重量 2.0kg 

♦供电方式 高容量锂电 

Second, technical parameters:

♦ Force value: 0～10.000KN Strength value: 50mm test block 0～5.09MPa

♦ Strength value: 20mm test block 0～31.84MPa

♦ Resolution 0.001KN / 0-001MPa

♦ Hydraulic cylinder stroke 10mm

♦ Body material Lightweight alloy

♦ Body weight 2.0kg

♦Power supply mode High capacity lithium battery

三、特点：

♦仪器结构 一体式设计，门形结构 

♦显示模式 力值（KN）、强度(MPa)可调 

♦便携式手持仪器，可用于任何场所，无需外接电源--既可用于实验室，又可用于现场

♦大而易读的液晶数字显示

♦加压速率指示-方便操作者观察和调整加压速率

♦可按键选择拉拔头尺寸、测量单位和存储数据

♦可按照拉拔头尺寸自动计算结果

♦峰值保持 ，数据存储 500条

♦液晶照明，方便夜晚施工

♦数值修正 5段折线数值修正，保证A高精度 

♦符合标准  GB/T 5210-2006《色漆和清漆拉开法附着力试验》;

Third, features:

♦ Instrument structure Integrated design, gate structure

♦Display mode Force value (KN), intensity (MPa) adjustable

♦ Portable handheld instrument, can be used in any location, no external power supply - both in the laboratory and on the spot

♦ Large and easy to read LCD digital display

♦ Pressurization rate indication - easy for the operator to observe and adjust the pressurization rate

♦You can select the pull head size, measurement unit and storage data by pressing the button.

♦ Automatic calculation of results according to the size of the pull head

♦ Peak hold, data storage 500

♦ LCD lighting for easy night construction

♦ Numerical correction 5 segment fold line value correction to ensure the highest precision

♦ Compliance with the standard GB/T 5210-2006 "paint and varnish pull-off method adhesion test";