EDG-2混凝土无核密度仪

一、混凝土无核密度仪仪器简介： 

无核密度仪可快速测量水工碾压混凝土、水稳层密度及压实度。采用电磁感应技术代替核子源放射法，成本低，高安全，用户不用为繁琐的环评申请、耗时的培训、以及严苛的运输管制而烦恼。标定简单，精度高，可重复性好，触摸屏操作，用户能在短时间内完成相关的操作培训，掌握现场质量检测的技术。 

I. Introduction to Concrete Nucleus Density Meter:

The nuclear-free density meter can quickly measure the density and compaction of hydraulic RCC, water stable layer. Using electromagnetic induction technology instead of nuclear source radiation method has low cost and high safety, and users do not need to worry about tedious environmental assessment application, time-consuming training, and strict transportation control. Simple calibration, high accuracy, good repeatability, touch screen operation, users can complete relevant operation training in a short time, master the technology of field quality inspection.

二、混凝土无核密度仪仪器特点: 

● 快速准确地进行水工碾压混凝土、水稳层密度及压实度测量。 

● 采用无核技术意味着免除了许可证，服务费或安全方面的考虑。 

● 3秒钟**能准确读出数据。 

● 触摸屏操作，操作更简单。 

● 无需标定，现场直接测试。 

● 连续测量、平均测量、离析测量三种测量模式可选。 

● 精度更高，稳定性更好。 

Second, the characteristics of concrete nuclear density meter:

● Quickly and accurately measure hydraulic RCC, water stable density and compaction.

● Adopting non-nuclear technology means eliminating license, service fee or security considerations.

● 3 seconds ** can read the data accurately.

● Touch screen operation for easier operation.

● No calibration is required, and it is tested directly on site.

● Three measurement modes: continuous measurement, average measurement, and isolation measurement are available.

● Higher accuracy and better stability.

三、混凝土无核密度仪技术参数： 

A、检测部分 

●   操作温度：周围环境0～70℃ 

表面A高175℃ 

存放温度-20～70℃ 

● 检测深度：2cm～30cm 

● 温度传感器：测量范围0～350℃ 

●  显示测量项目：密度 压实度 

● 测量时间：＜3秒 

●   测量精度：3% 

●  内置测量校正功能，各种温度和湿度情况下都能得到准确的结果 

B、仪器规格、电子部分参数 

● 主机尺寸：255×188×74mm 

●  主机重量：1.95kg 

●   显示：5.1寸高亮彩色触摸屏 

●   数据存储：32G内存，可存储100万个测试数据 

●  主电源：12V 5000mAh锂电池 

● 电池运行时间：可连续使用20小时 

Third, the technical parameters of concrete nuclear density meter:

First, the detection part

● Operating temperature: 0 ～ 70 ℃

Surface A high 175 ℃

Storage temperature -20 ～ 70 ℃

● Detection depth: 2cm ～ 30cm

● Temperature sensor: measurement range 0 ～ 350 ℃

● Display measurement items: density, compactness

● Measurement time: <3 seconds

● Measurement accuracy: 3%

● Built-in measurement correction function, accurate results can be obtained under various temperature and humidity

Instrument specifications and electronic parameters

● Host size: 255 × 188 × 74mm

● Host weight: 1.95kg

● Display: 5.1-inch highlight color touch screen

● Data storage: 32G memory, can store 1 million test data

● Main power: 12V 5000mAh lithium battery

● Battery runtime: 20 hours of continuous use