上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

电液式混凝土压力试验机,混凝土压力试验机

电液式混凝土压力试验机是**检测仪器,用于测试砖、石、水泥及混凝土抗压强度试验,是建筑,建材,公路,桥梁及机场施工单位的A设备。使用前务必仔细阅读说明书。并由**实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

  • 型号: DYE-1000

  • 产品参数
  • 型号: DYE-1000

 

电液式混凝土压力试验机**检测仪器,用于测试砖、石、水泥及混凝土抗压强度试验,是建筑,建材,公路,桥梁及机场施工单位的A设备。使用前务必仔细阅读说明书。并由**实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

Electro-hydraulic concrete pressure testing machine is a testing instrument used to test the compressive strength of brick, stone, cement and concrete. It is the A equipment of construction, building materials, highway, bridge and airport construction units. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.

 

电液式混凝土压力试验机符合GB-T50081-2002普通混凝土力学性能试验方法标准,具有手动加荷及加荷速度装置,主要本实验机精度高操作方便,而且可与电脑联网,是目前国内更新换代的A佳新产品。由上海荣计达仪器科技有限公司提供,设备质保期一年,一年内产品如有质量问题,供方负责免费维修。如果因操作不当或者人为损坏,我公司亦应提供维修、更换服务,由此产生的费用我公司会酌情收取

Electro-hydraulic concrete pressure testing machine conforms to the GB-T50081-2002 general concrete mechanical property test method standard, with manual loading and loading speed devices. The main testing machine has high accuracy and convenient operation, and can be connected to a computer. A good new product. Provided by Shanghai Rongjida Instrument Technology Co., Ltd., the equipment warranty period is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged as appropriate.

 

电液式混凝土压力试验机技术参数:

A大载荷:1000KN

■准确度等级:一级

■测力范围:200--1000KN

A小分辨率:0.1KN

■上下压板中间净距:320mm

■上下压板尺寸:220X250mm

■电机功率:0.75KW

■仪表使用电压:220V±10%

■电机使用电压:380V±10%

■活塞直径XA大行程:φ255X50mm

■机器净重:400Kg

Technical parameters of electro-hydraulic concrete pressure testing machine:

■ A large load: 1000KN

■ Accuracy level: Level 1

■ Measuring range: 200--1000KN

■ A small resolution: 0.1KN

■ The middle clear distance between the upper and lower pressure plates: 320mm

■ Size of upper and lower platen: 220X250mm

■ Motor power: 0.75KW

■ Instrument voltage: 220V ± 10%

■ Motor use voltage: 380V ± 10%

■ Large stroke of piston diameter XA: φ255X50mm

■ Net weight of machine: 400Kg

 

电液式混凝土压力试验机要结构:

本机主要由主机、液压系统和测力单元等组成。

■主机

主要由上梁、立柱、调节丝杠及手轮、承压板、油缸和活塞等组成。丝杠末端与上压板间装有活动球座,操作时当上压板底面与试件顶面接触后,能自动适应试件高度方向的细微倾斜度,使两平面互相接触全面,从而使度件受力均匀。根据试件大小,可转动手轮和丝杠,以适当调节试验空间。

下压板顶面上刻有定位线框,便于将试件放置在**位置。

■ 液压系统

由液压泵、送油阀、回油阀、油箱、滤油器及油管等组成。

液压泵为轴向五柱塞超高压泵,由电动机直联驱动,送油阀上设有安全阀,过载是可溢流,起安全作用。操纵送油阀手轮,可调节油缸进油量,以达所需加荷速率。打开回油阀,可使油缸内和油泵来的油全部流回油箱。

■ 测力单元

主要包括测控系统、打印机和压力传感器等。(详见所附《RFP-03智能测力仪使用说明书》

4、 电气系统由电动机、启动按钮、停止按钮、交流接触器、熔断器等组成。

Key structure of electro-hydraulic concrete pressure test machine

This machine is mainly composed of main machine, hydraulic system and force measuring unit.

■ Host

It is mainly composed of upper beam, column, adjusting screw and hand wheel, pressure bearing plate, oil cylinder and piston. There is a movable ball seat between the end of the screw and the upper pressure plate. When the bottom surface of the upper pressure plate is in contact with the top surface of the test piece during operation, it can automatically adapt to the slight inclination in the height direction of the test piece, so that the two planes are in full contact with each other. Even by force. According to the size of the test piece, the hand wheel and the screw can be turned to adjust the test space appropriately.

A positioning wire frame is engraved on the top surface of the lower platen, which is convenient for placing the test piece in the ** position.

■ Hydraulic system

It consists of hydraulic pump, oil delivery valve, oil return valve, oil tank, oil filter and oil pipe.

The hydraulic pump is an axial five-plunger ultra-high-pressure pump, which is directly driven by an electric motor. A safety valve is provided on the oil delivery valve. The overload can overflow and play a safety role. By manipulating the handwheel of the oil delivery valve, the amount of oil in the cylinder can be adjusted to achieve the required loading rate. Opening the oil return valve allows all the oil in the cylinder and the oil pump to flow back to the oil tank.

■ Force measuring unit

Including measurement and control systems, printers and pressure sensors. (See the attached "RFP-03 Intelligent Force Gauge Instruction Manual" for details

4. The electrical system consists of a motor, a start button, a stop button, an AC contactor, and a fuse.


电液式混凝土压力试验机,混凝土压力试验机
电液式混凝土压力试验机是**检测仪器,用于测试砖、石、水泥及混凝土抗压强度试验,是建筑,建材,公路,桥梁及机场施工单位的A设备。使用前务必仔细阅读说明书。并由**实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。
长按识别二维码查看详情
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

电液式混凝土压力试验机,混凝土压力试验机

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号