上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

荣计达QTB腻子柔韧性测定仪

用于涂料涂装行业,对腻子膜层弯曲后,膜层产生裂纹和脱落现象的判断,腻子柔韧性测定仪根据GB1748—88标准要求设计制造。

  • 型号: QTB

  • 产品参数
  • 型号: QTB


 

上海荣计达仪器科技有限公司**经营水泥实验仪器、混凝土实验仪器、公路土工实验仪器、干粉砂浆保温砂浆实验仪器、沥青防水材料实验仪器、油漆涂料实验仪器、无损检测等实验仪器。**经营水泥实验仪器、混凝土实验仪器、公路土工实验仪器、干粉砂浆保温砂浆实验仪器、沥青防水材料实验仪器、油漆涂料实验仪器、无损检测等实验仪器。公司产品凭借过硬的质量、完善的售后服务、合理的价格畅销各大院校、检测单位、建材企业、工程建设单位。在消费者当中享有较高的地位和良好的口碑,用户遍布国内近三十个省市、自治区,并远销国外,与用户建立了长期稳定的合作关系。公司实力雄厚,重信用、守合同。有健全的管理制度和完善健全的质量管理体系。并有反应迅速、服务周到的售后服务系统。我们将不懈努力、一如既往以优异的品质为客户服务。

Shanghai Rongjida Instrument Technology Co., Ltd. ** operates cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. ** Operating cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. Company products rely on excellent quality, perfect after-sales service, reasonable prices sell well in major universities, testing units, building materials enterprises, engineering construction units. It enjoys a high status and a good reputation among consumers, and has customers in nearly 30 provinces, cities, and autonomous regions in China, and has been exported to foreign countries. It has established long-term and stable cooperative relationships with users. The strength of the company, credit and contract compliance. Have a sound management system and a sound quality management system. And has a responsive and thoughtful after-sales service system. We will make unremitting efforts to serve our customers with excellent quality as always.

 

腻子柔韧性测定仪**检测仪器,用于涂料涂装行业,对腻子膜层弯曲后,膜层产生裂纹和脱落现象的判断腻子柔韧性测定仪根据GB1748—88标准要求设计制造

The putty flexibility tester is a testing instrument used in the paint coating industry to judge the cracks and peeling of the putty film after the putty film is bent. The putty flexibility tester is designed and manufactured according to the GB1748-88 standard.

QTB腻子柔韧性测定仪工作原理简介:

该仪器主要由压架与脱模两个部分组成,使用时**先将压紧辊柄和压架放置托模的后端,使托膜完全显露出来,然后将样板插入托膜后端的小槽内并用压紧柄使偏心轴压住样板的一端,然后将压架搬下通过压架上的滚动轴使样板沿着托膜表面均匀地弯曲变形,压架搬至定位肖处为上后观察样板腻子膜表面的物理变化。

托腊规格分为两种:R25  R50

通过在规定的条件下漆膜随其底材一起变形而不发生损坏的能力评价漆膜的柔韧性

试验技术特定:在标准规定条件下,弯曲试度板后,以使腻子膜开裂脱落时的弯曲膜的直径mm)表示

Brief introduction to the working principle of QTB putty flexibility tester:

The instrument is mainly composed of two parts: the holder and the demoulding. When using it, first place the compaction roller handle and the holder on the rear end of the supporting mold to fully expose the supporting film, and then insert the sample plate into the small end of the supporting film. In the groove, the eccentric shaft is pressed against one end of the sample plate with a compression handle, and then the holder is moved down through the rolling shaft on the holder to make the sample bend and deform uniformly along the surface of the supporting film. Observe the physical changes on the surface of the sample putty membrane.

There are two specifications of Tora: R25 R50

Evaluate the flexibility of a paint film by its ability to deform with its substrate without damage under specified conditions

The test technology is specific: Under the conditions specified in the standard, after bending the test plate, the diameter of the curved film when the putty film cracks and falls is expressed in mm)

 

QTB腻子柔韧性测定仪技术参数:

★执行标准:GB/T1748-88

★试膜或轴棒尺寸:金属弯曲膜直径50mm ,100mm

★试板底材厚度:0.2-0.3mm(马口铁板)

外形尺寸:300X120X90mm

重量:8kg

Technical parameters of QTB putty flexibility tester:

★ Executive standards: GB / T1748-88

★ Test film or shaft rod size: metal bending film diameter 50mm, 100mm

★ Test board substrate thickness: 0.2-0.3mm (tinplate)

★ Dimensions: 300X120X90mm

★ Weight: 8kg

 

QTB腻子柔韧性测定仪保养:

仪器在停止使用时请擦去表面污垢,转动部位涂40#机油润滑,放置通风干燥环境中保存

QTB putty flexibility tester maintenance:

When the instrument is not in use, please wipe off the surface dirt, lubricate the rotating part with 40 # oil, and store it in a ventilated and dry environment.

 


荣计达QTB腻子柔韧性测定仪

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

荣计达QTB腻子柔韧性测定仪

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号