上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

荣计达岩石耐崩解试验仪

岩石耐崩解试验仪是专业检测仪器,用于测定岩石的耐用崩解指数的试验仪器,可以测试岩石由于受气候原因影响干湿交替后,可以抵抗崩解的耐久性能。使用前务必仔细阅读说明书。并由专业实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

  • 型号:NBJ-1

  • 产品参数
  • 型号:NBJ-1

 

 

岩石耐崩解试验仪是专业检测仪器,用于测定岩石的耐用崩解指数的试验仪器,可以测试岩石由于受气候原因影响干湿交替后,可以抵抗崩解的耐久性能。使用前务必仔细阅读说明书。并由专业实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

The rock resistance tester is a professional test instrument for testing the rock's durable disintegration index. It can test the durability of the rock against the disintegration of the rock due to the influence of climatic reasons. Be sure to read the instructions carefully before use. It is operated by professional experimenters to avoid injury caused by improper operation. For more information, please contact our customer service staff.

 

岩石耐崩解试验仪通过固定在设备底板上的马达,以每分钟20转的速度旋转2个鼓形试样箱。鼓形试样箱安装在涂有润滑油的轴承上,旋转时没有阻力。鼓形试样箱是采用抗腐蚀材料制成的,配有两个水槽。广泛适用于各大院校、科研所、试验中心等测定粘土类岩石和风化岩石等。

The rock resistant disintegration tester rotates two drum-shaped sample cases at a speed of 20 revolutions per minute through a motor fixed to the bottom plate of the apparatus. The drum sample box is mounted on a lubricant-coated bearing and has no resistance when rotated. The drum sample box is made of corrosion-resistant material and is equipped with two sinks. It is widely used in the measurement of clay rocks and weathered rocks in universities, research institutes and test centers.

 

岩石耐崩解试验仪技术参数

■主机功率:90W

■转速:20转/分

■筛筒:φ140*100mm,

■标准筛孔孔径:2mm

■水槽容积:150*150*120mm6、试样规格:每块40~60g,共10块, 用磨盘或砂布打磨成浑圆形

■试件形状:大致为球形状、无棱角

■外形尺寸:750*400*450mm

Rock resistance tester technical parameters:
■ Host power: 90W
■Speed: 20 rpm
■Screen cylinder: φ140*100mm,
■ Standard mesh hole diameter: 2mm
■Sink volume: 150*150*120mm6, sample specifications: 40-60g each, a total of 10 pieces, polished with a grinding disc or abrasive cloth into a round shape
■ Specimen shape: roughly spherical shape, no corners
■Dimensions: 750*400*450mm

 

岩石耐崩解试验仪使用方法:
■选择好试件,核对试件名称及编号,填入记录表内。
■将试件装入耐崩解试验仪的圆柱形筛筒内,在105~110℃的温度下烘干至恒量后,在干燥器内冷却至室温称量。
■将装有试件的圆柱形筛筒放在水槽内,向水槽内注入纯水,使水位在转动轴下约20mm。圆柱形筛筒以20 r/min的转速转动10 min后,将圆柱形筛筒和残留试件在105~110℃的温度下烘干至恒量后,在干燥器内冷却至室温称量。

■重复本条3项的程序,求得第二次循环后的圆柱形筛筒和残留试件质量。
■必要时按3的程序进行5个循环。

■试验过程中,水温应保持在20±2℃范围内。

■试验结束后,应对残留试件、水的颜色和水中沉积物进行描述。根据需要,对水中沉积物进行颗粒分析、界限含水量测定和粘土矿物分析。8、称量精确至0.01g。

Rock resistance tester:
■ Select the test piece, check the name and number of the test piece, and fill it in the record form.
■ The test piece is placed in a cylindrical sieve cylinder of a disintegration tester, and dried to a constant amount at a temperature of 105 to 110 ° C, and then cooled to room temperature in a desiccator to be weighed.
■ Place the cylindrical sieve drum with the test piece in the water tank, and inject pure water into the water tank so that the water level is about 20 mm below the rotating shaft. After the cylindrical sieve cylinder was rotated at 20 r/min for 10 min, the cylindrical sieve cylinder and the residual test piece were dried to a constant amount at a temperature of 105 to 110 ° C, and then cooled to room temperature in a desiccator.
■ Repeat the procedure of item 3 of this article to obtain the quality of the cylindrical sieve drum and residual test piece after the second cycle.
■ If necessary, follow the procedure of 3 for 5 cycles.
■ During the test, the water temperature should be kept within the range of 20 ± 2 °C.
■ After the test, the residual test piece, the color of the water, and the sediment in the water should be described. Particle analysis, boundary water content determination and clay mineral analysis were performed on sediments in water as needed. 8. Weigh accurately to 0.01g.


荣计达岩石耐崩解试验仪

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

荣计达岩石耐崩解试验仪

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号