上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

电液式混凝土压力试验机,200吨混凝土压力试验机,混凝土压力试验机

混凝土压力试验机是专业检测仪器,用于测定砖、石、砼等建筑材料的抗压强度。使用前务必仔细阅读说明书。并由专业实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

  • 型号:DYE-3000

  • 产品参数
  • 型号:DYE-3000

 

 

 

混凝土压力试验机是专业检测仪器,用于测定砖、石、砼等建筑材料的抗压强度。使用前务必仔细阅读说明书。并由专业实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

The concrete pressure testing machine is a professional testing instrument for measuring the compressive strength of building materials such as bricks, stone and concrete. Be sure to read the instructions carefully before use. It is operated by professional experimenters to avoid injury caused by improper operation. For more information, please contact our customer service staff.

 

混凝土压力试验机为电动液压加荷、传感器测力、数字显示力值、打印机打印力值数据、并换算抗压强度。本试验机符合国家标准《普通混凝土力学性能实验方法标准》,应手动控制加载速度,并具有加荷速度指示装置、峰值保持、过载保护功能,是建筑、建材、公路桥梁等工程单位A的试验检测设备。由上海荣计达仪器科技有限公司提供,设备质保期一年,一年内产品如有质量问题,供方负责免费维修。如果因操作不当或者人为损坏,我公司亦应提供维修、更换服务,由此产生的费用我公司会酌情收取

The concrete pressure testing machine is electro-hydraulic loading, sensor force measurement, digital display force value, printer printing force value data, and conversion compressive strength. The test machine conforms to the national standard "Testing method standard for mechanical properties of ordinary concrete". It should manually control the loading speed, and has the function of loading speed indicating device, peak holding and overload protection. It is the test of engineering unit A of construction, building materials, highway bridges, etc. Testing Equipment. Provided by Shanghai Rongjida Instrument Technology Co., Ltd., the equipment warranty period is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If the operation is improper or man-made damage, our company should also provide repair and replacement services, and the expenses incurred by the company will be charged as appropriate.

 

混凝土压力试验机技术参数

A大载荷:3000kN

★示值准确度:一级

A小分辨值:0.1kN

★承压板间A大距离:400mm

★上下压力板规格:300×300mm

★活塞直径*A大行程:直径290×50mm

★电机功率:0.75kW

★输入电压:380V

★外型尺寸:1400×500×1400mm

★净重:1000KG

Concrete pressure testing machine technical parameters
★A large load: 3000kN
★Indication accuracy: Level 1
★A small resolution: 0.1kN
★ A large distance between the pressure plate: 400mm
★ Upper and lower pressure plate specifications: 300×300mm
★Piston diameter *A large stroke: diameter 290 × 50mm
★Motor power: 0.75kW
★Input voltage: 380V
★Outer size: 1400×500×1400mm
★ Net weight: 1000KG

 

混凝土压力试验机使用与操作注意事项

 使用前应先检查油箱内的油液是否充足,可察看右侧面油标,如不足,则应打开后箱板向油箱内添加之,至液面在油标处为宜。

 检查各油灌接头和紧固件是否松动,如有松动则拧紧之。检查防尘罩应完整无损。检查电气接地、保险熔丝等安全防护措施是否有效。

 使用时,应先将回油阀打开,关闭回油阀,接通电源,按下启动按钮,油泵开始工作,然后关闭回油阀,徐徐打开送不油阀,活塞上升一段距离,有无卡住等现象。如有,则应卸荷、停机检查,并排除之。打开回油阀,活塞则下降到原位。

 将试件表面擦拭干净,检查外观有无明显缺陷,如有能影响试验数值者,须更换无损试件。

 按试件下压板定位线框放在下压板正中,并按试件大小,转动手轮和丝杠,调节上压板至适当位置。

接通测控系统电源(开关在测控箱背后),按操作步骤进行清零以及时钟修改等各有关数据的输入。

 按下启动按钮,关闭回油阀,调控送油阀,按需要速率平稳进行加荷试验,及至试件被压碎,负荷下降。随即打开回油阀,使油液迅速流回油箱。

试验结束时,按面板上“打印”键。打印机即可打印输出该次的试验报告。

 操作时,下压板上升高度不得超过4cm(或立柱上标志线),以免发生意外。

操作中禁止手等人体任何部分置于上下压板之间,并注意试件在破碎时碎片崩出伤人。

 试后随即清除破碎试块,以待下次试验。当不再做试验时,要打开回油阀,关闭送油阀,切断电源。

Concrete pressure testing machine use and operation precautions
★ Before use, check whether the oil in the fuel tank is sufficient. You can check the oil mark on the right side. If it is insufficient, you should open the rear tank plate and add it to the fuel tank. The liquid level should be at the oil mark.
★ Check if the oil filler joints and fasteners are loose, and tighten if loose. Check that the dust cover should be intact. Check whether the safety protection measures such as electrical grounding and fuse are effective.
★ When you first use it, you should first open the oil return valve, close the oil return valve, turn on the power, press the start button, the oil pump starts working, then close the oil return valve, slowly open the oil supply valve, the piston rises a certain distance, there is No jamming and other phenomena. If it is, it should be unloaded, stopped, and excluded. Open the return valve and the piston will fall to its original position.
★ Wipe the surface of the test piece clean and check the appearance for obvious defects. If it can affect the test value, replace the non-destructive test piece.
★ Press the positioning plate of the lower plate of the test piece in the middle of the lower platen, and according to the size of the test piece, turn the handwheel and the screw to adjust the upper platen to the proper position.

★ Turn on the power of the measurement and control system (the switch is behind the measurement and control box), and press the operation steps to input the relevant data such as zeroing and clock modification.
★ Press the start button, close the oil return valve, regulate the oil delivery valve, perform the load test smoothly at the required rate, and the test piece is crushed and the load is reduced. The return valve is then opened to allow the oil to quickly flow back to the tank.
★ At the end of the test, press the “Print” button on the panel. The printer can print out the test report for this time.
★ When operating, the height of the lower platen should not exceed 4cm (or the marking line on the column) to avoid accidents.
★ During operation, it is forbidden to place any part of the human body between the upper and lower pressure plates, and pay attention to the broken pieces of the test pieces when they are broken.
★ Immediately after the test, the broken test block will be removed for the next test. When the test is no longer performed, open the return valve, close the oil supply valve, and cut off the power.


电液式混凝土压力试验机,200吨混凝土压力试验机,混凝土压力试验机

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

电液式混凝土压力试验机,200吨混凝土压力试验机,混凝土压力试验机

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号