上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

建筑保温材料燃烧性能检测装置

是专业检测仪器,适用于判定建筑材料是否具有可燃性的试验方法。

  • 型号:JCK-2

  • 产品参数
  • 型号:JCK-2


 

 

建筑保温材料燃烧性能检测装置是专业检测仪器,适用于判定建筑材料是否具有可燃性的试验方法。使用前务必仔细阅读说明书。并由专业实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

The building material flammability test furnace is a professional testing instrument and is suitable for testing methods for determining whether a building material is flammable. Be sure to read the instructions carefully before use. It is operated by professional experimenters to avoid injury caused by improper operation. For more information, please contact our customer service staff.

 

建筑保温材料燃烧性能检测装置适用标准:

GB8626-2007《建筑材料可燃性试验方法》

GB/T1080L2-2002《绝热用挤塑聚苯乙烯泡沫塑料(XPS)》

Standard for the flammability test furnace of building materials:
GB8626-2007 "Test method for flammability of building materials"
GB/T1080L2-2002 "Extrusion extruded polystyrene foam (XPS)"

 

建筑保温材料燃烧性能检测装置技术参数:

箱体高度700×400×600mm

试样尺寸250×90mm

试件A大厚度60mm

燃烧器喷嘴孔径φ0.17mm

外型尺寸:700mm×400mm×810mm

重量:50kg

Technical parameters of building materials flammability test furnace:
★Box height 700×400×600mm
★ sample size 250 × 90mm
★ test piece A large thickness 60mm
★ burner nozzle aperture φ0.17mm
★Outer size: 700mm × 400mm × 810mm
★ Weight: 50kg

 

建筑保温材料燃烧性能检测装置特点:

该装置的箱体采用不锈钢板(δ1.5mm)弯弯制而成,其造型美观、线条清晰,具有耐腐蚀抗老化特点。

该建筑保温材料燃烧性能检测装置装置中燃烧器配备测量火焰标尺,燃烧器火焰调节方便、灵活、准确。

试件夹按标准所规定的结构,严格制做,试件装夹,速度快、燃烧效果好

 

建筑保温材料燃烧性能检测装置结构及安装

结构

该试验仪由燃烧试验箱、燃烧器、试验支架、调节阀等几部分组成。液化气(丙烷)罐自备

安装

将底座放入箱体内,固定套、试样架等按图示安装好。将燃烧器放在试样前。燃烧器拉杆从箱体外箱体内拧在燃烧器底座上。将丙烷表与液化气罐连接上,将调节阀与丙烷表的另一端用塑料管连接好,用气动管将调节阀与燃烧器连接起来。

Building materials flammability test furnace features:
★The box of the device is made of stainless steel plate (δ1.5mm), which is beautiful in appearance and clear in line. ★ It has corrosion resistance and aging resistance.
★ The burning device of the building insulation material burning performance detecting device is equipped with a measuring flame scale, and the burner flame adjustment is convenient, flexible and accurate.
★The specimen clamp is strictly prepared according to the structure stipulated by the standard. The specimen is clamped, the speed is fast, and the combustion effect is good.

Building materials flammability test furnace structure and installation
★Structure
The tester consists of a combustion test chamber, a burner, a test stand, a regulating valve and the like. Liquefied gas (propane) tanks are provided
★Installation
Put the base into the box, fix the sleeve, sample holder, etc. as shown in the figure. Place the burner in front of the specimen. The burner rod is screwed from the outer casing of the casing to the burner base. Connect the propane meter to the liquefied gas tank, connect the regulating valve to the other end of the propane meter with a plastic tube, and connect the regulating valve to the burner with a pneumatic tube.

 

建筑保温材料燃烧性能检测装置试验操作

选用合适的点火定位器,放在燃烧器顶端。

试样放在试样夹内,挂上。

燃烧器接近试样对好位置后,把底板上直尺锁紧定位。

将滤纸放在铝箔制的收集盘内,放在试件下方。

将燃烧器立起,打开调压阀旋钮,用电子点火器在喷嘴上点火,逐渐调节火焰长度至20mm左右,将燃烧器倾斜45度,按照标准要求的距离给试样点火

Building material flammability test furnace test device test operation
★ Use a suitable ignition positioner and place it on top of the burner.
★ Place the sample in the sample holder and hang it.
★ After the burner is close to the sample, lock the ruler on the bottom plate.
★ Place the filter paper in the collection tray made of aluminum foil and place it under the test piece.
★ Raise the burner, open the pressure regulating valve knob, ignite the nozzle with an electronic igniter, gradually adjust the flame length to about 20mm, tilt the burner 45 degrees, and ignite the sample according to the standard required distance.


建筑保温材料燃烧性能检测装置

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

建筑保温材料燃烧性能检测装置

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号