上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

耐热性悬挂装置

防水卷材耐热性悬挂装置是专业检测仪器,含3个夹子,6个铜钉,3个划线装置。

  • 型号:ZSY-9

  • 产品参数
  • 型号:ZSY-9

 

耐热性悬挂装置是专业检测仪器,含3个夹子,6个铜钉,3个划线装置。使用前务必仔细阅读说明书。

The waterproof coiled heat-resistant suspension device is a professional testing instrument with 3 clips, 6 copper nails and 3 scribing devices. Be sure to read the instructions carefully before use.

 

耐热性悬挂装置使用方法:

先将试样按规定尺寸裁剪好,然后把试样需要刮除的部分事先划出线。将刮刀放在电热炉(需自备)上加温,等刮刀足够热后,在正反两面按标准用20mm刮刀刮除20×15mm的两个区域(直至胎体),用40mm的刮刀刮除100×15mm的区域(直至胎体)。

刮涂干净后,将划线器装在20×15mm的区域,在试件的裸露区上打好眼,用插销将两个划线器固定好后,用记号笔在正反两面分别沿试件宽度方向划线。

Waterproof coil heat-resistant suspension device use method:
First cut the sample to the specified size, and then draw the part of the sample that needs to be scraped out beforehand. Place the scraper on the electric heating furnace (need to bring its own) and warm it. After the scraper is hot enough, scrape the 20×15mm two areas (up to the carcass) with the 20mm scraper on the front and back sides, and scrape with a 40mm scraper. Except for the area of 100 × 15mm (up to the carcass).
After scraping and smearing, install the scriber in the area of 20×15mm, make a good eye on the exposed area of the test piece, fix the two scribers with the bolt, and use the marker to test the front and back sides separately. The width direction is crossed.

 

耐热性悬挂装置划线完毕后,将划线器卸下,用夹子夹在100×15mm的区域,涂盖层不要夹到,必要时用如硅纸(需自备)的不粘层包住两面,便于试验结束时除去夹子。

After the waterproofing coil heat-resistant suspension device is finished, the scriber is removed, and the clip is clamped in the area of 100×15mm, and the coating layer is not clipped. If necessary, use silicon paper (need to be provided). The adhesive layer wraps both sides for easy removal of the clip at the end of the test.

 

耐热性悬挂装置符合 GB/T 328 中规定防水卷材在温度升高时的抗流动性测定,试验卷材的上表面和下表面在规定温度或连续在不同湿度测定的耐热性极限。

试验用来检验产品耐热性要求,或测定规定产品的耐热性极限,如测定老化后性能的变化结果.

The waterproof coiled heat-resistant suspension device meets the resistance to flow resistance of the waterproof coiled material when the temperature rises as specified in GB/T 328. The upper and lower surfaces of the test coil are heat-resistant at a specified temperature or continuously measured at different humidity levels. Sexual limit.
The test is used to test the heat resistance requirements of the product, or to determine the heat resistance limit of the specified product, such as the measurement of the change in performance after aging.

 

耐热性悬挂装置(由夹子,划线器,插销等组成)中规定防水卷材在温度升高时的抗流动性测定,试验卷材的上表面和下表面在规定温度或连续在不同湿度测定的耐热性极限。试验用来检验产品耐热性要求,或测定规定产品的耐热性极限,如测定老化后性能的变化结果

The waterproof coiled material heat-resistant suspension device (composed of a clip, a scriber, a plug, etc.) defines the flow resistance of the waterproof coiled material at an elevated temperature, and the upper and lower surfaces of the test coil are at a prescribed temperature or continuous The heat resistance limit measured at different humidity levels. The test is used to test the heat resistance requirements of the product, or to determine the heat resistance limit of the specified product, such as the measurement of the change in performance after aging.


耐热性悬挂装置

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号