上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

卷材冲片机

防水卷材冲片机是专业检测仪器,供防水材料橡胶厂及科研单位进行拉力试验前冲切标准橡胶试片用。对于类似材料,本机亦可冲切。

  • 型号:CP-25

  • 产品参数
  • 型号:CP-25


 


卷材冲片机是专业检测仪器,供防水材料橡胶厂及科研单位进行拉力试验前冲切标准橡胶试片用。对于类似材料,本机亦可冲切。还可以供防水材料。橡胶厂裁取试件,本冲片机适用于冲裁位伸试片,及各种形状的试件,广泛用于建筑实验室、科研单位及橡胶试样取材。具有方便灵活、简单易用等优点。

The waterproof coiling machine is a professional testing instrument for the waterproof rubber factory and scientific research unit to punch the standard rubber test piece before the tensile test. For similar materials, the machine can also be die cut. Waterproof materials are also available. The rubber factory cuts the test piece. The punching machine is suitable for punching the position test piece and various shapes of the test piece, and is widely used in construction laboratories, scientific research units and rubber samples. It is convenient, flexible, and easy to use.

 

卷材冲片机技术规格:

★冲切行程:25mm

★工作台尺寸:175×140(mm)

★外形尺寸:320mm×450mm×515mm

★重量:80kg

Waterproof membrane punching machine technical specifications:
★ Punching stroke: 25mm
★Workbench size: 175×140 (mm)
★Dimensions: 320mm × 450mm × 515mm
★ Weight: 80kg

 

卷材冲片机使用方法:

冲片机根据不同试样选择相应的切刀,装在该冲片机上压板位置上。将料放在刀垫上,使丝杠下移,切刀与料相接触。将控制旋钮向压样方向旋转,拧紧为止。用手上、下搬动操纵杆,使下压板向上移动,压样完成后,将控制旋钮向复位方向旋转,下压板自动复位。

CP-25 waterproof roll punching machine:
The punching machine selects the corresponding cutter according to different samples and installs it on the platen position of the punching machine. Place the material on the knife pad to move the screw down, and the cutter is in contact with the material. Rotate the control knob in the direction of the sample and tighten it. Move the joystick with your hand and down to move the lower pressure plate upward. After the pressure is completed, turn the control knob to the reset direction, and the lower pressure plate automatically resets.

 

卷材冲片机安装:

本机安装时打好基础,找好水平用m8膨胀螺栓固定即可。

把裁刀轻轻放在丝杠下的冲压柱底部,冲压柱下面配有超强力磁铁,能稳固裁刀,安装快捷,调整方便。

试件冲压时应在工作台配备硬木或胶板以防损坏刀口。

实验完毕后应将表面清理干净、丝杠、冲压柱涂防锈油脂,套好防护罩。

CP-25 waterproof membrane punching machine installation:
★ When the machine is installed, lay the foundation and find the level with m8 expansion bolts.
★ Gently place the cutter on the bottom of the stamping column under the screw. The punching column is equipped with an ultra-strong magnet to stabilize the cutter. It is quick to install and easy to adjust.
★ When the test piece is stamped, it should be equipped with hardwood or rubber plate on the workbench to prevent damage to the knife edge.
★ After the experiment is completed, the surface should be cleaned, the lead screw and the stamping column should be coated with anti-rust grease, and the protective cover should be covered.

 

 


卷材冲片机

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号