上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

油毡拉力试验机, 砂浆拉力试验机,电子拉力试验机

防水卷材拉伸试验机适用于各种防水卷材、涂料.橡胶、编织物及小截面金属细丝。也可用于符合本试验机条件时的其它试验

  • 型号:DL-5000

  • 产品参数
  • 型号:DL-5000

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机适用于各种防水卷材、涂料.橡胶、编织物及小截面金属细丝。也可用于符合本试验机条件时的其它试验,使用前务必仔细阅读说明书。并由专业实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

The waterproof coil tensile tester is suitable for all kinds of waterproof coils, coatings, rubber, braids and small-section metal filaments. It can also be used for other tests in accordance with the conditions of this test machine. Please read the instructions carefully before use. It is operated by professional experimenters to avoid injury caused by improper operation. For more information, please contact our customer service staff.

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机由上海荣计达仪器科技有限公司提供,参照《GB/T328-2007系列》相关标准设计制造,具有造型美观,设计合理,性能稳定,结构紧凑操作方便优点。

The waterproof coil tensile testing machine is provided by Shanghai Rongjida Instrument Technology Co., Ltd., and is designed and manufactured according to the relevant standards of GB/T328-2007 series. It has the advantages of beautiful appearance, reasonable design, stable performance, compact structure and convenient operation.

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机技术参数

大试验力:5000N

试验力有效测量范围:80N—2000N

试验力小分辨力:1N

拉伸夹具间A大距离:800mm

试验速度:2-500mm 可调

电源:220V±10%

Waterproof coil tensile testing machine technical parameters:
★ Large test force: 5000N
★Test force effective measurement range: 80N-2000N
★Test force small resolution: 1N
★ A large distance between the stretching fixtures: 800mm
★ Test speed: 2-500mm adjustable
★Power supply: 220V±10%

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机结构

本试验机由底座、箱体立柱、夹头、丝杠、轨道、电子测力系统、位移测量系统等零部件组成。

机械加荷系统由下箱体内减速箱及丝杠组成。

夹头由支架、压板、支柱、轧片、弹簧等主要零件组成,上夹头与测力体相连,通过它所夹持的试件向上运动实现测力传递。

Waterproof membrane tensile testing machine structure
★ This test machine consists of the base, the box column, the chuck, the screw, the track, the electronic force measurement system, the displacement measurement system and other components.
★The mechanical loading system consists of a reduction box and a lead screw in the lower case.
★The chuck is composed of main parts such as bracket, pressure plate, pillar, lap, spring, etc. The upper chuck is connected with the force measuring body, and the test piece is clamped upward to realize the force transmission.

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机安装:

本试验机整台装箱出厂,安装时应预先打好砼底座,高度应和本机相配,方便操作为宜,也可向本厂订做底柜。本机设置应找水平,否则对拉力数值有影响,本机底部有四个底脚螺栓用以调整水平,接好地线即可使用。

Waterproof membrane tensile testing machine installation:
The whole test box of the test machine is shipped from the factory. The base should be pre-installed in the installation, the height should be matched with the machine, it is convenient to operate, and the base cabinet can also be customized to the factory. The machine setting should find the level, otherwise it will affect the pull value. There are four foot bolts on the bottom of the machine to adjust the level, and the ground wire can be used.

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机调试与使用:

夹头位置调整:

1、按面板上的上升按键,同时面板上状态指示灯红灯亮,相应速度档位指示灯开始闪烁,液晶屏上状态显示位置:上升,同时实时显示力值和移值,如果到达力值或位移的A大限制值,自动停机,同时液晶屏状态位置显示满载或限位.

2、按面板上的下降按键,同时面板上的状态指示灯绿灯亮,相应速度档位指示灯开始闪烁,液晶屏上状态显示位置显示[下降],同时实时显示力值和移值.

3、按面板上的停止按键,同时面板上状态指示灯熄灭,相应速度档位指示灯停止闪烁保持常亮,液晶屏状态显示位置显示停止.

速度调整:

按下相应的七个速度按纽中需要选择一个便完成速度的调整,相应的速度指示灯会点亮,注意不要同时按下多个速度按纽.

Debugging and use of waterproof membrane tensile testing machine:
Chuck position adjustment:
1. Press the up button on the panel, and the status indicator on the panel will be red, the corresponding speed gear indicator will start to flash, the status display position on the LCD screen will rise, and the force value and shift value will be displayed in real time. Or the displacement of the A large limit value, automatically stop, while the LCD status position shows full load or limit.
2. Press the down button on the panel, and the status indicator on the panel will light green. The corresponding speed gear indicator will start to flash. The status display position on the LCD will display [Down], and the force value and shift value will be displayed in real time.
3. Press the stop button on the panel, and the status indicator on the panel will be off. The corresponding speed gear indicator will stop flashing and stay on, and the LCD status display will stop.
Speed adjustment:
Press the corresponding seven speed buttons to select one to complete the speed adjustment, the corresponding speed indicator will light, be careful not to press multiple speed buttons at the same time.

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机使用方法:

首先按下面板上清零按扭,系统会自动进行拉力和位移零位校准,然后按下启动按纽,同时面板上状态指示灯亮红灯,相应速度档位指示灯开始闪烁,液晶屏上显示力值和位置的A大值,如果满足预定的停机条件,系统自动停机,液晶屏状态自动显示位置,断裂,并保持A大力值和位移A大值,等待2s后系统,开始回车,同时面板上状态指示红灯亮,相应速度档位指示灯开始闪烁,回到零位后系统自动停机,面板上状态指示灯熄灭,相应速度档位指示灯停止闪烁保持常亮,液晶屏上状态显示位置显示有效.                                                 按下启动按纽后如人工按下停止按键系统自动停止,同时产生无效数据,并给出相应指示,.在测试过程中如果拉力和位移到达大限制值,系统也自动停机,同时液晶屏状态位置显示满载或限位.

Waterproof membrane tensile testing machine use:
First press the clear button on the panel, the system will automatically perform the tension and displacement zero calibration, then press the start button, and the status indicator on the panel will light red, the corresponding speed gear indicator will start flashing, and the LCD will display The maximum value of force value and position A, if the predetermined stop condition is met, the system will automatically stop, the LCD screen will automatically display the position, break, and maintain the A value of the force and the displacement A, wait for 2s after the system, start the carriage return, at the same time The status indicator on the panel is red, the corresponding speed gear indicator starts to flash. After returning to the zero position, the system will automatically stop, the status indicator on the panel will go out, the corresponding speed gear indicator will stop flashing and stay on, and the status on the LCD will be displayed. The position display is valid. After pressing the start button, if the button is pressed manually, the system automatically stops, and invalid data is generated at the same time, and corresponding instructions are given. If the tension and displacement reach a large limit during the test, the system will automatically stop. At the same time, the LCD status position shows full load or limit.

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机手动停车和自动停车方式的调整(请注意:切勿轻易调整)

按设置键,液晶屏显示输入密码.密码为22.按2次清零再按2次样本密码位置显示22.输入完毕.按设置键再按下打印键6次显示回车状态.按下样本为手动回车,按下清零键为自动回车,按下设置键退出,调整完毕.注自动回车时可按下样本键否则按停止键后数值不保持.

Adjustable manual parking and automatic parking mode for waterproof coil tensile testing machine (please note: do not adjust easily)
Press the setup button, the LCD will display the input password. The password is 22. Press 2 times to clear and then press 2 times. The sample password position is displayed. 22. Input is complete. Press the Setup button and press the Print button 6 times to display the carriage return status. Press the sample. For manual return, press the clear key to enter the auto return, press the set key to exit, the adjustment is completed. Note: You can press the sample key when you press the auto return, otherwise the value will not be maintained after pressing the stop key.

 

油毡拉力试验机, 砂浆拉试验机,电子拉力试验机系统状态显示位置显示有效,按下面板样本按纽,系统自动存储当前测试数据,样本数加1,如在其它状态下按下样本按纽,液晶屏状态显示均值,系统显示目前测试过程中的全部样品的平均值,如果再次按动按纽样本按纽,液晶屏上状态位置显示浏览.同时开始存储样本由后到前的浏览.浏览完成A个样本后,系统再次显示平均值,再次准备样本由前到后的浏览.按其他强键退出浏览.

Waterproof coil tensile testing machine system status display position display is valid, press the panel sample button, the system automatically stores the current test data, the number of samples is increased by 1, if the sample button is pressed in other states, the LCD screen displays the mean value, the system Display the average value of all the samples in the current test. If you press the button button again, the status display on the LCD will display the browse. At the same time, start the storage of the sample from the back to the front. After browsing the A sample, the system again Display the average value and prepare the sample again from front to back. Press other strong keys to exit browsing.


油毡拉力试验机, 砂浆拉力试验机,电子拉力试验机

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

油毡拉力试验机, 砂浆拉力试验机,电子拉力试验机

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号