上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

JM-IV漆膜磨耗仪

漆膜磨耗仪适用于GB/T15036.2、GB/T15102、GB/T18102、GB/T4893.8、ISO7784.2标准。

  • 型号:JM-IV

  • 产品参数
  • 型号:JM-IV


 

一,JM-IV漆膜磨耗仪产品简介:
漆膜磨耗仪适用于GB/T15036.2、GB/T15102、GB/T18102、GB/T4893.8、ISO7784.2标准。对漆膜耐膜性能的测试和对木材饰面耐磨性能的测试必须采用不同配置的转盘组件和磨耗轮,请在定货时予以说明(可选择“漆膜配置”、“木材配置”或“两用配置”)。转盘转速可在50-100r.P.m范围内按用户要求特殊设置(需订货时说明)

Product introduction:
The paint film abrasion meter is suitable for GB/T15036.2, GB/T15102, GB/T18102, GB/T4893.8, ISO7784.2 standards. Testing of the film's film resistance and testing of the wear resistance of the wood finish must be carried out with different configurations of the turntable assembly and the wear wheel, please specify when ordering (optional "film configuration", "wood configuration" or "optional" Dual-use configuration"). The rotation speed of the turntable can be set according to the user's requirements within the range of 50-100r.P.m (please specify when ordering)


二,JM-IV漆膜磨耗仪产品特点:
的磨耗工序 将待测材料放在转盘上,两个磨耗轮以一定压力压在材料上使其受磨耗。 磨耗轮随样件盘转动面转动,产生相对运动和磨耗,而转动 (60 RPM 72 RPM) 过程中磨耗轮轴相对于转盘转轴的偏移产生滑移运动,从而磨耗材料。 面积为30平方厘米的样件承受磨耗时,样件表面材料受全角度颗粒或丝织状物磨损形成一完整的圆环。磨耗机是当前功能A好的加速磨损试验仪。通过改变附件可以改变试验功能。这款耐用型仪器可以在一种物料同一点上进行重复测试,至厚约0.5"的材料破损或被磨掉。 选择不同的磨耗轮和附件可以模拟不同的真实磨耗情况进行不同的试验。
严格的控制保证可靠的结果 精心挑选的磨耗轮磨料,质量高 加在磨擦轮上的压力以克为单位 磨耗轮稳定性经严格的质量控制 电子测量转盘转动数 真空吸尘器除磨屑。
Features:
Good wear process Place the material to be tested on the turntable, and the two wear wheels are pressed against the material with a certain pressure to be worn. The wear wheel rotates with the rotating surface of the sample disc, causing relative motion and wear, while the rotation of the wear wheel (60 RPM or 72 RPM) produces a slip motion relative to the rotation of the turntable shaft, thereby damaging the material. When the sample with an area of 30 square centimeters is subjected to wear, the surface material of the sample is worn by a full-angle particle or silk weave to form a complete ring. The wearer is a good acceleration wear tester for current function A. The test function can be changed by changing the attachment. This rugged instrument can be retested at the same point of a material, and materials up to about 0.5" thick are broken or worn away. Different wear wheels and accessories can be selected to simulate different true wear conditions for different tests.
Strict control guarantees reliable results Carefully selected grinding wheel abrasives, high quality Plus pressure on the grinding wheel in grams of wear wheel stability through strict quality control Electronic measuring turntable rotation number Vacuum cleaner in addition to wear debris.

 

三,JM-IV漆膜磨耗仪技术参数:
 主电动机功率:40W
 修磨电动机:JX5612 220V 90W 2800r/min
 转盘转速:0~90r/min
 橡胶砂轮:50*16*13
 荷重砝码:250 500 750
 荷重砝码标示重量:500 750 1000
砝码标示重量为施加压于试件表面的重力
荷重砝码上标示的重量=砝码实际重量+加压套重量250克(固定在仪器上)
例:荷重砝码上标示的重量为500=砝码实际重量250+加压套250
 砂轮平衡砝码:1 2 5 10 20 (销轴20克)
 外形尺寸:主机:220*280*300(长**高)
    修磨机:300*205*175(长**高)
 重量:15Kg
Third, technical parameters:
♦ Main motor power: 40W
♦ Grinding motor: JX5612 220V 90W 2800r/min
♦ Turntable speed: 0~90r/min
♦ Rubber wheel: 50*16*13
♦ Load weight: 250g 500g 750g
♦ Load weight weight: 500g 750g 1000g
The weight of the weight is the weight applied to the surface of the test piece.
The weight indicated on the load weight = the actual weight of the weight + the weight of the compression sleeve is 250 grams (fixed on the instrument)
Example: The weight on the load weight is 500g = the actual weight of the weight is 250g + the pressure set is 250g
♦ Grinding wheel balance weight: 1g 2g 5g 10g 20g (pin 20g)
♦ Dimensions: Main unit: 220*280*300 (length * width * height)
     Grinding machine: 300*205*175 (length * width * height)
♦ Weight: 15Kg


四,JM-IV漆膜磨耗仪工作原理:
严格的控制保证可靠的结果 精心挑选的磨耗轮磨料,质量高 加在磨擦轮上的压力以克为单位 磨耗轮稳定性经严格的质量控制 电子测量转盘转动数 真空吸尘器除磨屑。
漆膜磨耗仪是由二个磨耗砂轮配置于转盘上,当转盘旋转时,左侧一个磨耗砂轮由外向样板表面中心磨擦,而右侧一个磨耗砂轮由样板表面中心向外磨擦。当转盘旋转一周时,在样板表面磨耗的痕迹是由互相重合,并呈X形相交的二园环组成。采用这种方式,其优点是使样板表面各个方向都受到磨擦,克服了一个方向往复运动的耐磨仪的缺点。
Fourth, the working principle:
Strict control guarantees reliable results Carefully selected grinding wheel abrasives, high quality Plus pressure on the grinding wheel in grams of wear wheel stability through strict quality control Electronic measuring turntable rotation number Vacuum cleaner in addition to wear debris.
The paint film abrasion device is arranged on the turntable by two wear grinding wheels. When the turntable rotates, one wear wheel on the left side is rubbed from the center of the surface of the outward sample, and one wear wheel on the right side is rubbed outward from the center of the surface of the sample plate. When the turntable rotates for one round, the traces worn on the surface of the template are composed of two circular rings that coincide with each other and intersect in an X shape. In this way, the advantage is that the surface of the template is rubbed in all directions, overcoming the shortcomings of the reciprocating wearer in one direction.


;JM-IV漆膜磨耗仪注意事项:
⑴ 测试结束后,应切断电源,清理仪器,将仪器罩好。
⑵ 长期不用时,应将砂轮取下放好。
⑶ 一年至二年必须检修加油一次
Five; Note:
(1) After the test is finished, the power should be turned off, the instrument should be cleaned, and the instrument should be covered.
(2) When not in use for a long time, the grinding wheel should be removed and placed.
(3) One year to two years must be repaired once




JM-IV漆膜磨耗仪

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号