上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

JCK-3建材可燃性试验炉

建材可燃性试验炉利用德国 Kleinbrenner(克莱因勃伦纳)原理,在垂直方向小火焰直接冲击下,用于测定B级建筑材料的燃烧性能(即用于建筑材料燃烧性能/阻燃等级B级的判定)。

  • 型号:JCK-3

  • 产品参数
  • 型号:JCK-3

建材可燃性试验炉使用范围

在老款产品基础上新增试样可控自动升降、本生灯可进退调节功能的升级产品,是严格依据国家标准GB8626-2007规定的而生产的的高配置建材燃烧等级测试仪器。

建材可燃性试验炉是在正常的燃烧环境中,用小火焰直接冲击垂直放置的试样以测定建筑制品可燃性。建材可燃性试验炉利用德国Kleinbrenner(克莱因勃伦纳)原理,在垂直方向小火焰直接冲击下,用于测定B级建筑材料的燃烧性能(即用于建筑材料燃烧性能/阻燃等级B级的判定)。

Building materials flammability test furnace use range
On the basis of the old products, the new product can be controlled by the automatic lifting and lowering, and the Bunsen burner can be upgraded and upgraded. It is a high-profile building material burning level test instrument which is produced strictly according to the national standard GB8626-2007.
The building material flammability test furnace measures the flammability of the building product by directly impacting the vertically placed sample with a small flame in a normal combustion environment. The flammability test furnace for building materials uses the German Kleinbrenner principle to measure the combustion properties of Class B building materials under the direct impact of a small vertical flame (ie for the combustion properties of building materials / flame retardant grade B) Level judgment).

建材可燃性试验炉主要技术参数

★环境温度:15℃~25℃;

★相对湿度:≤85%;

★供电电压和功率:220V    50HZ   100W;

★气源:纯度不低于95%的商用丙烷 ,普通试验也可用液化石油气代替(涉及运输安全气源需用户自备);

★本生灯对式样施加火焰时间15s

★单片机控制,数字显示。

★烧器孔径为Φ0.17mm、本生灯火焰长度20mm±2mm,燃烧器可倾斜45°。

★对试样施加火焰(1s-99 s)±0.5s,可任意调节,精度±0.2s。

★可燃气源:纯度95%以上的丙烷。

Main technical parameters of building materials flammability test furnace
★ Ambient temperature: 15 ° C ~ 25 ° C;
★ Relative humidity: ≤ 85%;
★Power supply voltage and power: 220V 50HZ 100W;
★Air source: commercial propane with a purity of not less than 95%. The general test can also be replaced by liquefied petroleum gas (the user needs to bring their own safety).
★Bunsen burner applies flame time to the style for 15s
★ Single-chip control, digital display.
★The burner diameter is Φ0.17mm, the Bunsen burner flame length is 20mm±2mm, and the burner can be tilted 45°.
★ Apply flame (1s-99 s) ±0.5s to the sample, which can be adjusted arbitrarily with an accuracy of ±0.2s.
★Combustible gas source: Propane with a purity of over 95%.

建材可燃性试验炉产品功能特点

★符合人机工程学的操作设计,试验全部通过触摸屏操作完成,自动化程度高,可存储以往试验结果,可调阅以往试验数据

★伺服电机驱动式样架可控自动升降;

★本生灯可进退调节;

★1.5mm不锈钢钢板箱体;

★2扇钢化耐热玻璃门双角度观察测试, 双(带锁)方便实用

★高压自动点火,耐久燃烧;

★点火源可自动倾斜45度;

★火焰高度通过精密调节阀进行调节;

★试样架可以上下及前后进行移动;

★配备两种试样夹。

★火焰测量标尺;

★自动化程度高,实验数据精准、易操作;

★箱体尺寸:94cmx40cmx80cm

★材质:1.5mm不锈钢

★箱体底部为平置自然通风口,通风口由5cm*5cm方格通风口组成(真正1.5mm厚钢板通风口,高50mm)保持气流平整通过

★做工细致,真正无焊点工艺

Building materials flammability test furnace product features
★Equipped with ergonomic operation design, all tests are completed by touch screen operation, high degree of automation, can store past test results, and can be used to read past test data.
★ Servo motor driven sample rack can be controlled to automatically lift;
★ Bunsen burner can be adjusted to advance and retreat;
★ 1.5mm stainless steel steel box body;
★Two-steel heat-resistant glass door double angle observation test, double (with lock) convenient and practical
★ high pressure automatic ignition, durable combustion;
★The ignition source can be automatically tilted by 45 degrees;
★The flame height is adjusted by a precision regulating valve;
★The sample holder can be moved up and down and back and forth;
★ Equipped with two sample holders.
★ flame measurement scale;
★High degree of automation, accurate and easy to operate experimental data;
★Box size: 94cmx40cmx80cm
★Material: 1.5mm stainless steel
★The bottom of the box is a flat natural vent, and the vent is made up of 5cm*5cm square vents (true 1.5mm thick steel vents, 50mm high) to keep the airflow through.
★Working meticulously, the real solderless process

建材可燃性试验炉触摸显示屏:

1. 尺寸:7寸 有效显示尺寸 长15.5cm 宽8.6cm;

2. 分辨率:800*480

3. 通讯接口 RS232、3.3V CMOS或TTL、串口方式

4. 储存容量:1G

5. 采用纯硬件FPGA驱动显示,“零”启动时间,上电即可运行

6. 采用M3+FPGA架构,M3负责指令解析,FPGA专注TFT显示,保障速度和可靠性

7. 主控制器均采用低能耗处理器,自动进入节能模式

Building materials flammability test furnace touch screen:
1. Size: 7 inches Effective display size Length 15.5cm Width 8.6cm;
2. Resolution: 800*480
3. Communication interface RS232, 3.3V CMOS or TTL, serial port mode
4. Storage capacity: 1G
5. Use pure hardware FPGA driver display, “zero” startup time, run on power
6. Using M3+FPGA architecture, M3 is responsible for instruction parsing, FPGA focuses on TFT display, guarantees speed and reliability
7. The main controller adopts a low-energy processor and automatically enters the energy-saving mode.


JCK-3建材可燃性试验炉

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

JCK-3建材可燃性试验炉

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号