上海荣计达仪器科技有限公司

咨询电话:137-6111-8616


砌墙砖抗渗试验仪

砌墙砖抗渗试验仪又称多孔砖抗渗试验装置,适用范围广,精度高,设计精巧耐用。该方法操作简单,劳动强度小,能直接表述试件的抗渗性能。使用前务必仔细阅读说明书。并由专业实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

  • 型号: ZST-1

  • 产品参数
  • 型号: ZST-1

一、简要概述:

砌墙砖抗渗试验仪又称多孔砖抗渗试验装置,适用范围广,精度高,设计精巧耐用。该方法操作简单,劳动强度小,能直接表述试件的抗渗性能。砌墙砖抗渗试验装置包括有蓄水筒,试件压板,螺杆,橡胶密封垫。试件压板通过螺杆和螺母安装于蓄水筒的底部,蓄水筒底板和试件压板均设有直径为50-80mm的圆孔。所述的蓄水筒的简体高约100cm。高出水位请用海绵吸出。进行试验时,通过螺栓,螺杆将试件紧固安装在蓄水筒与压板之间,通过蓄水筒中一定水位高度的水向筒底部的试件施加水压,经过一段时间后,检验试件的剖面的水渗透深度来评价试件的抗渗性。

First, a brief overview:

The brick wall impermeability tester is also called the porous brick impermeability test device, which has wide application range, high precision and exquisite design and durability. The method is simple in operation, small in labor intensity, and can directly express the impermeability of the test piece. The impervious test device for masonry bricks includes a water storage cylinder, a test piece pressure plate, a screw, and a rubber gasket. The test piece pressure plate is installed at the bottom of the water storage tube through a screw and a nut, and the water storage tube bottom plate and the test piece pressure plate are each provided with a circular hole having a diameter of 50-80 mm. The water storage cylinder has a simplified height of about 100 cm. Use a sponge to suck out the water level. During the test, the test piece is fastened between the water storage cylinder and the pressure plate by bolts and screws, and the water pressure is applied to the test piece at the bottom of the cylinder through the water of a certain water level in the water storage cylinder. After a period of time, the test piece is inspected. The water penetration depth of the profile is used to evaluate the impermeability of the test piece.


二、技术规格:

390×190×190;240×115×115;240×90;190×190;蓄水筒直径60mm。

Second, technical specifications:

390×190×190; 240×115×115; 240×90; 190×190; the water storage cylinder has a diameter of 60 mm.


三、执行标准: 

GB5101-2003 GB8239-1997 GB11968-2006 GB13544-2000 GB13545-2003 

烧结砖 P156 P155 GB/T2542-2003,GB/T4111-1997,GB/T11970 11973-1997,GB/T18968-2003,JC466-1996。

Third, the implementation of standards:

GB5101-2003 GB8239-1997 GB11968-2006 GB13544-2000 GB13545-2003

Sintered bricks P156 P155 GB/T2542-2003, GB/T4111-1997, GB/T11970 11973-1997, GB/T18968-2003, JC466-1996.


四、适用于砖的种类:

★烧结普通砖2,普通混凝土小型空心砌块 3,蒸压加气混凝土砌块 4,烧结多孔砖 5,烧结空心砖和空心砌块

普通烧结砖

★烧结普通砖按原料分为粘土砖(N),煤矸石砖(M)

★强度等级分为MU30,MU25,MU20,MU15,MU10五个强度等级,常用MU10这一级别

★砖的外形为直角六面体,面积尺寸=240×115×53mm(长×宽×高)

Fourth, the type of brick:

★Sintered ordinary brick 2, ordinary concrete small hollow block 3, autoclaved aerated concrete block 4, sintered porous brick 5, sintered hollow brick and hollow block

Ordinary sintered brick

★Sintered ordinary bricks are divided into clay bricks (N) and coal gangue bricks (M) according to raw materials.

★Intensity level is divided into five intensity levels: MU30, MU25, MU20, MU15, MU10, commonly used MU10 level

★The shape of the brick is a right-angled hexahedron, the area size = 240 × 115 × 53mm (length × width × height)


五、使用说明:

★将被测试样砖放在凹槽内加水观察。水线如平直整齐,说明密实度好,材料均匀一致;如果水线呈锯齿状,参差不齐,说明材质不均,抗渗差。

★再看水线上升高低和速度。优质砖一般上升至5mm左右即停止,几个小时不再上升。差砖在几十分钟内即可上升至A高点,更甚者整个砖都会湿。

★看水渗得快慢:优质砖三天后只是蒸发掉相当部分,水还在;差砖几小时后水即不复存在,全渗入砖内。所以渗水的快慢即可看出砖的密实度,也可看出砖的抗渗水能力。

★A后看砖的背面:如经24小时,砖背面有水珠出现,砖的抗渗漏能力差,连阴天屋面会渗漏;优质砖背面或不湿,或湿而无水珠出现。抗渗差的砖强度,防雨性,耐久性均差。

Five, instructions for use:

★ Place the tested sample bricks in the groove and add water to observe. If the water line is straight and tidy, the compactness is good and the material is uniform. If the water line is jagged, it is uneven, indicating that the material is uneven and the impermeability is poor.

★ Look at the water line to raise the low and speed. High-quality bricks generally rise to about 5mm and stop, and no longer rise for a few hours. The poor bricks can rise to the A high point in a few minutes, and even the whole brick will be wet.

★ See how fast the water seeps: After three days of high-quality bricks, only a considerable part of the water is evaporated, and the water is still there; after a few hours of poor bricks, the water no longer exists and completely penetrates into the bricks. Therefore, the speed of water seepage can be seen as the solidity of the brick, and the water resistance of the brick can also be seen.

★A look at the back of the brick: If there are water drops on the back of the brick after 24 hours, the brick's anti-leakage ability is poor, even the cloudy roof will leak; the back of the high-quality brick is not wet, or the wet and waterless beads appear. . Barrier strength, rain resistance, and durability are poor.


六、检验说明: 

★出厂检验:指生产厂家带的合格证,包括项目为尺寸偏差,外观,质量,强度等级。

★型式检验:指生产厂家每样或一定时间段内对产品的所有技术指标进行检验,如生产厂家不条件委托有资质的单位进行检验。

★进场检验和复试项目:尺寸偏差,外观质量,强度等级,目前施工单位委托强度等级。

Six, inspection instructions:

★Ex-factory inspection: Refers to the certificate issued by the manufacturer, including the item's dimensional deviation, appearance, quality, and strength level.

★ Type inspection: It means that all technical indicators of the product are inspected by the manufacturer every time or for a certain period of time. If the manufacturer unconditionally entrusts a qualified unit to carry out inspection.

★ Entry inspection and retest items: dimensional deviation, appearance quality, strength grade, current construction unit entrusted strength grade.


砌墙砖抗渗试验仪
砌墙砖抗渗试验仪又称多孔砖抗渗试验装置,适用范围广,精度高,设计精巧耐用。该方法操作简单,劳动强度小,能直接表述试件的抗渗性能。使用前务必仔细阅读说明书。并由专业实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。
长按识别二维码查看详情
长按图片保存/分享

砌墙砖抗渗试验仪

询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

扫一扫关注我们

Copyright @ 2018 上海荣计达仪器科技有限公司.All Rights Reserved   沪ICP备11009963号-4     

Copyright @ VillaGrandis All Rights Reserved某某某有限公司版权所有        

ICP备案号180006020号-3

 

客服中心
热线电话
13761118616
上班时间
周一到周日
二维码