SYD-2801D高低温沥青针入度仪

高低温沥青针入度仪是**检测仪器，用于测定道路石油沥青、液体石油沥青蒸馏或乳化沥青蒸发后残留物的针入度。

The high and low temperature asphalt penetration meter is a testing instrument used to determine the penetration of residues after road petroleum asphalt, liquid petroleum asphalt distillation or emulsified asphalt evaporation.

高低温沥青针入度仪特点：

★大屏幕液晶中文显示。

★可以连续试验三次，自动计算试验平均值。

★系统测试模式允许进行传感器检测和重新标定。

★仪器针杆套件可以通过调节扭在0－25mm内上下调节。

★贯入针杆可以上下手动调节。

★传感器超出量程自动提示。

★可设置试验时间为5秒，15秒，30秒，60秒。

★自动控制恒温水浴的温度，控温精度高，可以做低温试验。

★带有可掉电运行的实时时钟。

★可以保存10组试验数据(掉电保持10年)，并可以随时查询打印。

★带有打印接口。

★带有RS232C通讯接口。

★带有冷光源照明系统。

★恒温水浴采用进口双压缩机制冷，高精度智能表控制，控温精度更高。

High and low temperature asphalt penetration meter features:

★ Large screen LCD Chinese display.

★ It can test three times in a row and automatically calculate the test average.

★ System test mode allows sensor detection and recalibration.

★ The instrument needle bar kit can be adjusted up and down within 0-25mm by adjusting the twist.

★ The needle bar can be manually adjusted up and down.

★ The sensor will automatically remind when it is out of range.

★ The test time can be set to 5 seconds, 15 seconds, 30 seconds, 60 seconds.

★ Automatically control the temperature of the constant temperature water bath with high temperature control accuracy, which can be used for low temperature test.

★ With a real-time clock that can be powered down.

★ 10 sets of test data can be saved (10 years after power failure), and can be queried and printed at any time.

★ With print interface.

★ With RS232C communication interface.

★ With cold light source lighting system.

★ The constant temperature water bath adopts imported dual compressor refrigeration, high-precision intelligent meter control, and higher temperature control accuracy.

高低温沥青针入度仪技术指标：

★小分度：位移：0.01mm   时间：0.1s   温度：0.1℃

★大量程：40mm

★针连杆、砝码、标准针合重：100±0.05g   150±0.05g

★控温精度：0.1℃

★试验皿：金属制，平底状，尺寸为70×45    55×35（mm）

★平底保温皿：玻璃制品，容量大于1.5L，皿深大于60mm；附放试样皿用三角架一个。

★低温恒温水浴内部尺寸：50X40X30mm

★环境温度：5～40℃

★环境湿度：≦85﹪

★电源：AC220V±10％，50HZ

★外形尺寸：600x500x1300mm

★重量：75KG

★功率：2..5KW

Technical indicators of high and low temperature asphalt penetration meter:

★ Small scale: Displacement: 0.01mm Time: 0.1s Temperature: 0.1 ℃

★ Large range: 40mm

★ Needle connecting rod, weight, standard needle combined weight: 100 ± 0.05g 150 ± 0.05g

★ Temperature control accuracy: 0.1 ℃

★ Testing dish: metal, flat bottom, size 70 × 45 55 × 35 (mm)

★ Flat bottom insulation dish: glass products, the capacity is greater than 1.5L, the depth of the dish is greater than 60mm; a tripod is used for the sample dish.

★ Internal temperature of low temperature thermostatic water bath: 50X40X30mm

★ Ambient temperature: 5 ～ 40 ℃

★ Ambient humidity: ≦ 85 ﹪

★ Power supply: AC220V ± 10%, 50HZ

★ Dimensions: 600x500x1300mm

★ Weight: 75KG

★ Power: 2..5KW

沥青针入度仪各个型号简易说明：

1、SZR-3型针入度仪为双数显，半自动型，手动调节玻璃缸下方的调节螺杆，使试验沥青面与针头微接触。按试验键自动计时，时间到自动锁住针杆，手动用数显百分尺量针入度值，A后读取百分尺读数。

2、SZR-5型针入度仪为电脑自动型针入度仪，显微镜调节方式调节试验沥青面与针头接触。按试验键自动计时，时间到，液晶屏自动显示针入度值，存储，自动计算平均值。可以存储10组试验数据。

3、SZR-6型针入度于5型相似，多有加热装置，可以在温度低于25℃时自动控制温度维持在25℃,

4、SZR-7型针入度仪是在6型的基础上在加有打印机。

5、SZR-8型针入度仪为大屏显示，可以显示实时时间，可以连续做三次试验自动显示针入度平均值。可以连接电脑，带有试验软件。显微镜调节方式调节上下。可以自动校准，传感器超量程自动报警。

6、SZR-9型针入度仪在8型基础上加有打印功能。

7、SYD-2801F型在8型的基础上加有高低温恒温水浴，可以做高低温针入度试验。

Simple explanation of each model of asphalt penetration meter:

1. SZR-3 penetrometer is double digital display, semi-automatic type. Manually adjust the adjusting screw under the glass cylinder to make the test asphalt surface contact the needle slightly. Press the test button to automatically time it. When the time is up, the needle bar will be locked automatically. Manually use a digital micrometer to measure the penetration value. After A, read the micrometer.

2. SZR-5 penetrometer is a computer automatic penetrometer. The microscope adjustment method adjusts the contact between the test asphalt surface and the needle. Press the test button to automatically time, when the time is up, the LCD will automatically display the penetration value, store it, and automatically calculate the average value. Can store 10 sets of test data.

3. The penetration of SZR-6 is similar to that of type 5, and there are many heating devices, which can automatically control the temperature to be maintained at 25 ° C when the temperature is below 25 ° C

4. SZR-7 penetrometer is equipped with printer on the basis of type 6.

5. The SZR-8 penetrometer has a large screen display, which can display real-time time, and can perform three consecutive tests to automatically display the average value of the penetrability. Can be connected to a computer with test software. Microscope adjustment method to adjust up and down. Can be automatically calibrated, and the sensor will automatically alarm when it is out of range.

6. SZR-9 penetrometer has printing function on the basis of type 8.

7. SYD-2801F type is equipped with high and low temperature constant temperature water bath on the basis of type 8, which can be used for high and low temperature penetration test.