上海荣计达仪器科技有限公司

咨询电话:137-6111-8616


JQ-I甲醛释放量气候箱

该设备采用电子流量计、触摸屏控制。主要用于木制品、家具、地板、地毯、鞋类产品、建筑装修材料等消费品中游离态甲醛的测定。将已知表面积的试件,放入温度、湿度、空气流速和空气置换率控制在一定值的测试箱内。

  • 型号: JQ-I

  • 产品参数
  • 型号: JQ-I

一、设备用途:    

该设备采用电子流量计、触摸屏控制。主要用于木制品、家具、地板、地毯、鞋类产品、建筑装修材料等消费品中游离态甲醛的测定。

I. Equipment use:

The device is controlled by electronic flow meter and touch screen. Mainly used for the determination of free formaldehyde in consumer products such as wood products, furniture, flooring, carpets, footwear products, construction and decoration materials.


二、产品概述:

    将已知表面积的试件,放入温度、湿度、空气流速和空气置换率控制在一定值的测试箱内。甲醛从试件中释放出来,与箱内空气混合,定期抽取箱内空气,从箱中抽取空气通过盛有水的洗气瓶测定水中吸收的甲醛浓度。测试箱中空气的甲醛浓度由洗气瓶中的甲醛浓度和抽出的空气体积计算,用毫克每立方米(mg/m3)表示。取样是周期性的,直到测试箱内甲醛浓度达到平衡状态。

Product Overview:

     Put a test piece with a known surface area into a test box with controlled temperature, humidity, air velocity, and air replacement rate. The formaldehyde is released from the test sample, mixed with the air in the box, and the air in the box is periodically extracted. The air is extracted from the box and the concentration of formaldehyde absorbed in the water is measured through the air-wash bottle containing water. The formaldehyde concentration of the air in the test box is calculated from the formaldehyde concentration in the air wash bottle and the volume of the extracted air, and is expressed in milligrams per cubic meter (mg / m3). Sampling is periodic until the formaldehyde concentration in the test box reaches equilibrium.


三、环境仓设计参考标准:

《室内装饰装修材料 人造板及其制品中甲醛释放限量》(GB 18580-2017);

《甲醛释放量检测用1m 3 气候箱》(LYT 1612-2004) 

《小尺度环境箱测定木制品释放气体中甲醛浓度的标准测试方法》ASTM D 6007;

《人造板甲醛释放量测量环境箱法》EN 717-1;

《人造板及饰面人造板理化性能测试方法》(GB/T17657-2013);

《室内装饰装修材料木家具中有害物质限量》(GB18584-2001);

《室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂有害物质释放限量》(GB18587—2001);

《甲醛释放量检测用1M3气候箱》(LY/T1980一2011);       

《1M3气候箱法测定板材甲醛释放量》(ISO 12460-1.2007);

Third, the reference standard for environmental warehouse design:

"Interior decoration materials, formaldehyde release limit in wood-based panels and their products" (GB 18580-2017);

"1m 3 climatic chamber for detection of formaldehyde emission" (LYT 1612-2004)

"Standard Test Method for Determining the Formaldehyde Concentration in Gas Released from Wood Products by Small-scale Environmental Box" ASTM D 6007;

"Environmental Box Method for the Measurement of Formaldehyde Release from Wood-based Panels" EN 717-1;

"Test method for physical and chemical properties of wood-based panels and facing wood-based panels" (GB / T17657-2013);

"Limits of Harmful Substances in Wooden Furniture for Interior Decoration Materials" (GB18584-2001);

"Limits of harmful substances release for interior decoration materials carpets, carpet pads and carpet adhesives" (GB18587-2001)

"1M3 climatic box for the detection of formaldehyde emission" (LY / T1980-2011);

"Determination of Formaldehyde Release from Sheets by 1M3 Climate Box Method" (ISO 12460-1.2007);


四、性能特点:

●换热器工艺**:换热效率高,温度梯度小;

●冷热对抗调温水箱:温度控制稳定;

●进口湿度温湿度传感器:传感器精度较高、性能稳定;

●优质制冷机:进口冷冻机,运行稳定、使用寿命长;

●保护装置:气候箱、露点水箱均有高低温报警保护措施与高低水位报警;

●保护措施;压缩机亦有过热、过流、超压保护措施,整机运行安全可靠;

●不锈钢内箱体:恒温箱体内腔采用镜面不锈钢,表面光滑不结露,不吸附甲醛,保证检测精度;

●恒温箱体保温材料采用植物纤维不挥发甲醛。箱内装有强制空气循环装置(形成循环空气流),以确保箱内温湿度均衡一致。

Performance characteristics:

● Heat exchanger technology **: High heat exchange efficiency and small temperature gradient;

● Cold and hot counter temperature tank: stable temperature control;

● Imported humidity temperature and humidity sensor: The sensor has high accuracy and stable performance;

● High-quality refrigerator: imported refrigerator, stable operation and long service life;

● Protection device: climate box and dew point water tank have high and low temperature alarm protection measures and high and low water level alarm;

● Protection measures; the compressor also has overheating, overcurrent, and overpressure protection measures, and the whole machine runs safely and reliably;

● Stainless steel inner box: The inner chamber of the constant temperature box is made of mirror stainless steel. The surface is smooth without dew condensation and does not adsorb formaldehyde to ensure detection accuracy.

● The constant temperature box insulation material uses plant fiber non-volatile formaldehyde. The box is equipped with a forced air circulation device (forming a circulating air flow) to ensure that the temperature and humidity in the box are balanced.


五、技术参数:

1.工作环境温度:15℃~30℃ 工作环境湿度:≤90%RH      

2.温度可调范围:10℃~40℃,控温精度±0.1℃,波动率≤±0.5℃,均匀度≤±0.5℃  

3.湿度可调范围:30%~80%,控湿精度±2% RH ,波动率≤±3% RH,均匀度≤±5% RH

4.空气交换率:1m3/h,±5%  压力:10±5Pa

5.空气流速:0.1m/s~0.3m/s(连续可调),精度≤0.05m/s

6.气密性:舱门具有自密性。密闭性能满足:

① 在1kPa正压(表压)时,舱内空气泄漏率少于10-3*1M3/min;

② 进出口气体流量差小于1%。

7.内箱材质:304镜面不锈钢板无缝焊接,焊接处及周围抛光、无变形,内壁平整光滑,色泽均匀,无露底、起层、鼓泡、划痕。

8.外箱材质:A3彩钢板静电喷涂,涂镀层平整光滑,色泽均匀,无露底、起层、鼓泡、斑痕、较深划痕等缺陷,舱体及门有效热绝缘,采用植物纤维保温,保温层厚度不小于50mm,导热系数不大于0.01W/(m·K),内壁板之间的搭接处采用无缝焊接。

9.空气交换装置:舱体内部安装能够连续控制换气率装置(干空气流量计,或其它电子空气流动计量装置)。空气进口与出口应在不同的内壁上,并处于不同的高度,保障补充到舱内的空气流量满足相应标准要求。

10.空气循环(混合)装置:舱内安装风扇,用于加强舱内空气混合;试件表面附近的空气流速在0.1m/s至0.3m/s之间(可调)

Five, technical parameters:

1. Working environment temperature: 15 ℃ ~ 30 ℃ Working environment humidity: ≤90% RH

2. Temperature adjustable range: 10 ℃ ~ 40 ℃, temperature control accuracy ± 0.1 ℃, fluctuation rate ≤ ± 0.5 ℃, uniformity ≤ ± 0.5 ℃

3. Adjustable range of humidity: 30% ~ 80%, humidity control accuracy ± 2% RH, fluctuation rate ≤ ± 3% RH, uniformity ≤ ± 5% RH

4. Air exchange rate: 1m3 / h, ± 5% Pressure: 10 ± 5Pa

5.Air velocity: 0.1m / s ~ 0.3m / s (continuously adjustable), accuracy≤0.05m / s

6. Air tightness: The door is self-tight. Sealing performance meets:

① At 1kPa positive pressure (gauge pressure), the air leakage rate in the cabin is less than 10-3 * 1M3 / min;

② The difference between inlet and outlet gas flow is less than 1%.

7.Inner box material: 304 mirror stainless steel plate is seamlessly welded, the welding place and its surroundings are polished, no deformation, the inner wall is smooth, the color is uniform, and there is no exposed bottom, layer formation, blisters, scratches.

8. Outer box material: A3 color steel plate is electrostatic sprayed, the coating is smooth and uniform, the color is uniform, and there are no defects such as exposed bottom, layer formation, blisters, scars, deep scratches, etc. The cabin and door are effectively thermally insulated, and plant fiber insulation , The thickness of the insulation layer is not less than 50mm, the thermal conductivity is not more than 0.01W / (m · K), and the overlap between the inner wall plates is seamlessly welded.

9. Air exchange device: A device (dry air flow meter, or other electronic air flow metering device) capable of continuously controlling the ventilation rate is installed inside the cabin. The air inlet and outlet should be on different inner walls and at different heights to ensure that the air flow replenished into the cabin meets the requirements of the corresponding standards.

10. Air circulation (mixing) device: a fan is installed in the cabin to enhance the air mixing in the cabin; the air velocity near the surface of the test piece is between 0.1m / s and 0.3m / s (adjustable)

 

 设备清单

1 温湿度传感器 (北京昆仑海岸)

2 压缩机 (丹麦丹佛斯)

3 水泵 (德国威乐)

4 加热管 (中国鹏达)

5 触摸屏 (中国昆仑)

6 接触器 (法国施耐德)

7 继电器 (日本欧姆龙)

8 试验箱内胆 304镜面不锈钢

9 热继电器 (法国施耐德)

10 接线端子 (法国施耐德)

11 冷凝器 (台湾永强)

12 环保型制冷剂 (美国杜邦)

13 过滤器 (丹麦丹佛斯)

14 电磁阀 (丹麦丹佛斯)

15 膨胀阀 (丹麦丹佛斯)

16 压力控制器 (丹麦丹佛斯)

17 板式换热器 (丹麦丹佛斯)

18 大气采样器 (盐城天美仪表)


装箱单

序号 名称 数量 单位 备注

1 甲醛释放量气候箱 1

2 大气采样器 1

3 洗气瓶 2

4 干燥器瓶(未装干燥剂) 1

5 硅胶管 1

6 支架 1

7 试样架子 1

8 说明书 1

9 合格证 1

10 熔断器 1 备用


JQ-I甲醛释放量气候箱
该设备采用电子流量计、触摸屏控制。主要用于木制品、家具、地板、地毯、鞋类产品、建筑装修材料等消费品中游离态甲醛的测定。将已知表面积的试件,放入温度、湿度、空气流速和空气置换率控制在一定值的测试箱内。
长按识别二维码查看详情
长按图片保存/分享

JQ-I甲醛释放量气候箱

询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

扫一扫关注我们

Copyright @ 2018 上海荣计达仪器科技有限公司.All Rights Reserved   沪ICP备11009963号-4     

Copyright @ VillaGrandis All Rights Reserved某某某有限公司版权所有        

ICP备案号180006020号-3

 

客服中心
热线电话
13761118616
上班时间
周一到周日
二维码